Totem Acoustic FOREST Tower Speakers
Totem Acoustic FOREST
Available in
Maple, Black Ash, Mahogany and Cherry
Break in time: 100 – 150 hours
Placement from rear wall: 1' - 6'
Placement distance apart: 4' - 12'
Mass Loading: 2-15 lbs in each cabinet
Frequency Response: <33 Hz to 20 kHz + 2 dB in room
Impedance: 8 ohms (6.4 minimum)
Sensitivity: 87 dB
Power: 120 W continuous 200 W peak
Crossover frequency: 2.5 kHz compensated 2nd order
Woofer: 6 1/2", 3" voice coil”
Tweeter: 1" (2.54 cm) aluminum dome. Chambered
Max SPL's: In average size listening room (4 m x 5 m)
110 dB peak from pair at 2 m
Dimensions: w 8 x d 10.5 x h 36"
w 205 x d 267 x h 910 mm
From 
$3,795.00 pr
Call us today at:
(770) 931-0606

Description:

Enter the realm
Pulse, speed and dynamic contrasts all add up to a tingling “surprise factor” that borders on the surreal.

At ease with all types of music, the Forest opens up corridors of new experiences.

Whether you’re listening in stereo, multi-channel audio, or a high quality A/V application, Forest speakers bring forth a synergy between spatial cues, imaging and powerful dynamics that go beyond what is expected of “any speaker”

Aerodynamic rounded front baffle
Flush-mounted drivers
Angled rear baffle
Irreproachable bi-wireable W.B.T. terminals
The industry standard
“Claws” standard revolutionary floor interface supports
Control cabinet resonance
Gently and musically decouple speakers
Lock-mitred “monocoque chassis”
Unique in the industry
Expensive to produce
Extensive cross-bracing and radical angle internal floor
Borosilicate damping
Innovative porting allows for incredible extension and overall coherence
Specially modified proprietary drivers

Specifications:
The speakers require several hours of actual music playing time as a minimal break-in period. During this time, refrain from playing them at very loud levels. You will notice a definite gradual improvement in the cohesiveness of the music reproduction as this occurs.

It is only through the support of advocates such as yourself that true sound can be promoted...

Mass Loading: All Totem columns work very well without any type of mass loading. However if stability is an issue or if there is a particular over emphasis in the bass in the room they are used in, then mass loading can be experimented with. Variables such as electronics, wiring and room dynamics play a definite role and therefore the option is there for your experimentation. One may use: clean dry sand,silica sand, dry particulate matter or non-odor kitty litter.
Toe-in: Due to the fact that all Totem speakers have great off-axis dispersion, toe-in is generally not needed. Imaging will therefore be more stable from any point in the room. If the speakers are placed very far apart (over 7 feet) then a slight toe-in may be experimented with. However if room geometry does not permit a straight-ahead aspect they will also perform very well with a slight toe-in.

Totem Speakers are on display in the Audio Alternative Atlanta GA Showroom.

For questions or information on Totem Acoustic call us today at 770-931-0606

Home Theater / Audio & Video
Pictures are property of Audio Alternative
©2002-2011 Audio Alternative Inc..
Audio Alternative Is Atlanta's High-End Home Audio Leader